16" x 20" Hotronix Hover Press for Screen Printing and DTF

Hotronix Hover Press - 16" x 20" for DTF and Screen Printing

The Hotronix 16" x 20" Hover Digital includes digital time, temperature and pressure displays, auto opening, and allows the operator to set the press for two functions: hover or pressure. The first setting is for off contact: the press uses a surface cure. The machine closes, but stops 1" above the garment. No ink is lost from contact with the heater or transfer cover sheet. The second setting incorporates pressure that drives the graphic into the item. This gives the item a great feel and extends the wash ability.

In both settings, once the cycle has ended, the press automatically pops up ensuring that the shirt will not be scorched or burned even if the operator is not standing by the machine. The Hotronix Hover Press can be set in three combinations. In addition to hover and pressure settings, it also can be set to hover on the first and second settings or apply pressure on both settings.

Features:

• Made in the USA
• Cast-in tubular heating element every 2″(5cm), eliminating cold spots
• 3/4″ (2cm) thick, non-stick upper platen
• 3/8″ (1cm) Silicone rubber bottom pad
• Heavy duty design
• Scratch-resistant, baked-on powder coat finish
• Non-stick coated heater – stress relieved to prevent warping
• Dual Timer - perfect for pre-pressing
• Magnetic assist lockdown
• New safety feature - warning beeps before the press opens
• Space-saving clam shell design
• CE approved
• Platinum RTD heat sensor
• F° or C° available
• Temperature range 200°F – 400°F
• UL / ULC / CE / RoHS approved
• Lifetime warranty on heating element
• 5 year warranty on framework
• 2 year warranty on circuit board
• One year warranty parts/labor

Warranty Information:

• Heating Element – Lifetime
• Framework – 5 years
• Circuit Board – 2 years
• Parts & Labor – 1 year
• Warranty begins from the time of purchase to original owner.