Signage Substrate Sampler, Banners, Door Magnets and Corrugated Plastic Yard Signs Promo

2 x White 2 ft x 4 ft, 13oz. Banner Blanks, Greenstar (24" x 48")

13oz banners are perfect for indoor and outdoor use. Greenstar 13 oz. banner blanks come hemmed and grommetted (2-3 ft apart). Just add your vinyl graphics and they are ready to hang. Available in a variety of sizes and color

2 x DigiMag Magnetic Sign Blanks - 12" by 24", 30 mil

This is the #1 selling magnetic sheet in the United States. It is specially magnetized for NO dead spots. The 30 mil flexible material holds onto vehicles even at high speeds. They conform well to most metal surfaces and are easy to remove. These magnets can also be cut using a heavier duty vinyl cutter with servo motors such as the Titan 2/3 Roland or Graphtec vinyl cutters.

Simply apply your vinyl letters, printed vinyl graphics, or screen print ink. These 12" by 24" matte white magnetic sign blanks are a must have. They are perfectly sized for vehicle doors. Just add your graphics and you are ready to go!

2 x White Corrugated Plastic Sign Blank Sheets - Short Flute - 24" x 18" - 4mm

These twin-wall, coroplast sheets are produced from a high-impact, polypropylene copolymer. This copolymer resin is used in order to increase impact and low temperature performance. At normal temperatures, most oils, solvents and water have little to no effect, allowing these corrugated plastic signs to perform flawlessly in adverse weather conditions or as a product component exposed to harsh chemicals. If you are looking for hardy lawn signs or yard signs, this is the product for you.

Flutes run the direction of the second dimension - for example, the flutes run the 24" direction on a 36" x 24".

2 x White Corrugated Plastic Sign Blank Sheets - Long Flute - 18" x 24" - 4mm

4mm Corrugated Plastic Sheets, Long Flute, 18" width x 24" high. Light-weight PolyPro plastic ideal for temporary signage. Available in white and yellow. Stakes sold separately.

"Long flute" refers to the orientation of the sign. Fluting always runs vertically with a sign (so the stake struts can be inserted into it). Long flute means that the sheet is taller than it is wide.