Product Features
- ARMS 5.0
- Perf/Die Cut
- Expanded Area Cutting
- ISM (Intelligent Sensing Mode)
- Included stand is not the original stand but is a newer model stand that has been modified to work with the FC8600 64" cutter
Product Overview
HIGH PERFORMANCE CUTTING PLOTTER
Known around the world for its high precision cutting, and build quality, the FC8600 is the ultimate finishing solution for the signage, apparel, and automotive markets.
PERF CUT Enabled High Performance Cutters Finish The Job
With its included perf cut enabled custom tool settings - you have the ability to perforate cut all the way through your pre printed vinyl media creating pop-out, full-color stickers and decals without damaging your blade or cutting plotter machine.
Blade position 1 is for contour kiss cutting of vinyl media. Blade position 3 allows the blade to cut all the way through the media into the channel without damaging the cutting strip and blade.
Perforation cutting is performed by controlling the cutting force instead of blade up/down movements, increasing throughput. This is perfect for cutting separation lines for tearing out labels, fold lines for POP signs, and others.
Auto Mark Detection
The first registration mark is automatically detected within a wide search area; this eliminates the need to manually move the sensor near the registration mark position. Subsequent marks are automatically located which improves the operation of the registration mark searching.
Segment Area Compensation
A 4-point axis alignment is performed for each segmented area.In Normal Mode, this is performed by reading the marks in the middle of the feeding direction for the entire graphic and then cutting the entire graphic, providing high-precision alignment for long length Print & Cut applications.
Normal mode is available when Graphtec Studio, Graphtec Pro Studio, Cutting Master 2/3/4, or Plotter Controller software is used.Sequential mode is available when Graphtec Studio (ver. 2.1.200 or later) or Cutting Master 3 (ver. 2.1.211 or later) is used.This function is available in firmware version 2.10 or later.
In the new Sequential Mode, contour cutting is performed sequentially in each segmented area. Media movement is limited to the smaller area being cut, improving accuracy and tracking for heavier media or media that has been laminated.
Multiple-Mark Compensation
When the design is printed with the matrix copy function, the action of reading the marks and contour cutting is repeated for each copy. It significantly improve productivity for Print & Cut. This function is available when the Graphtec Studio, Graphtec Pro Studio, Cutting Master 2/3/4 software is used.
ISM (Intelligent Scan Mode)
The ISM incorporates a new scanning algorithm that not only expands the cutting range of compatible media, but also reduces scan times and increases mark scanning success. Registration marks are also detectable on colored media and textured media, such as glossy laminated materials that were difficult using the conventional method.
Media must be within the specification in range. Marks may not be detected due to poor print quality or media surface.This function is available in firmware version 2.10 or later.
