Product Overview
Take your DTF production further with the DTF Station Miro 36 Pro DTF Powder Shaker and Dryer. Replacing the standard Miro 36, this upgraded 36-inch system delivers higher throughput, expanded heating coverage, and more precise temperature control to keep pace with today's faster DTF printers.
Designed for automated powder application and curing, the Miro 36 Pro supports compatible printer output up to 237 sq. ft. per hour (22 m²/hour), depending on operating conditions. It retains the applications of the original Miro 36 while adding the production capacity needed for higher-output workflows, including approved Prestige X6 configurations.
The Miro 36 Pro expands the capabilities of the original Miro 36 with a more powerful curing system designed for faster roll-to-roll production. Its 36-inch media capacity accommodates wide-format DTF printing while automated powder application and curing reduce manual handling.
Four independently controlled temperature zones allow operators to fine-tune curing conditions for different media, adhesive powders, and production speeds. The expanded heating system combines front preheating, bottom heating, and two upper heating sections to provide additional curing coverage as film moves through the machine.
Streamline your DTF workflow with automated adhesive powder application and integrated drying. The Miro 36 Pro helps create a more efficient production process for shops producing garment transfers, gang sheets, and other heat-transfer graphics.
Built-in fume extraction with an optional external connection supports workplace air-management planning. Updated touchscreen and PLC controls provide convenient access to operating adjustments, while integrated safety sensors help protect the equipment during operation.
Ventilation Note: Integrated extraction does not eliminate the need to evaluate appropriate workplace ventilation and applicable safety requirements.
The Miro 36 Pro supports compatible DTF printers with media widths up to 36 inches, including:
Prestige X6 Compatibility: DTF Station specifies approved operation at 720 x 1200 DPI (Normal Strong A) or higher. Confirm the intended printer settings and production configuration before ordering.
Installation Note: Confirm the supplied electrical configuration, dedicated circuit requirements, doorway clearance, ventilation arrangements, and printer compatibility before installation.
The Miro 36 Pro delivers the familiar 36-inch workflow of the original Miro 36 with significantly greater curing capacity and control. For shops upgrading to faster DTF printers or expanding production volume, its four-zone heating system and automated operation provide a more capable finishing solution without moving beyond the 36-inch platform.
USCutter offers DTF printing equipment, supplies, and production solutions to help businesses build and expand their garment decoration workflows. Contact our team for assistance selecting compatible printers, DTF film, adhesive powders, and supporting equipment for your production needs.
PLEASE NOTE: You must be able to receive a freight shipment via loading dock, or have available on-site a suitable forklift or reach truck with extended forks and trained operator. In certain cases, lift-gate delivery may be available. Please refer to the site-prep checklist for delivery pathway and power requirements.
Buyer assumes all responsibility for delivery and delivery costs, additional services, handling fees, equipment rentals, or any additional costs associated with transport of the cargo (to include re-routing, inside delivery, or returns).
If you have any questions, please contact your USCutter Sales Rep at (425) 481-3555.