Siser ColorPrint Extra PU Plus

SISER ColorPrint Extra PU

printable HTV for nylon is here: ColorPrint™ Extra PU introduces a new formula based on a polyurethane composition. This not only allows for CPSIA certification, but also leads to a thinner and softer material when compared to our original ColorPrint Extra HTV. ColorPrint Extra PU is perfect for nylon surfaces that are difficult to decorate with typical HTV, such as storefront awnings, windbreakers, tents, umbrellas, and much more.

While ColorPrint Extra PU can be applied onto a variety of fabrics, it is recommended specifically for use with nylon substrates. Other printable products from Siser® are available for cotton- and polyester-based fabrics.

Compatible with Eco-solvent, Solvent and HP 110, 300 & 500 Series Latex Printers (Not compatible with typical home InkJet Printers or latex printers other than the model series specified).

Siser's TTD Easy Mask is recommended for use with this heat transfer material.

Application Settings

• Thickness: 90 Microns/3.5 Mils
• Applies to: Nylon, 100% Cotton, 100%
• Polyester, Cotton/Poly Blends
• Temperature: 305°F/150ºC
• Time: 15 Seconds
• Pressure: Medium
• Peel: Hot/Warm

Adheres to:

• Nylon
• Leather
• Canvas
• 100% polyester
• 100% Cotton
• All Poly/cotton blends

Washing Instructions:

• Wait 24 hours before first wash
• Machine wash cold
• Use mild detergent
• Do not bleach or dry clean
• Dry on low dryer setting
• Wash inside-out for best results

Testing:

Always test on a fabric swatch prior to production, especially on heavily treated fabrics.