Product Overview
24-inch Gallery Premium DTF Shaker 110v is the most energy-efficient 110v powder shaker on the market, bar none. This is the ONLY fully automated powder shaker that can cure up to 56 linear feet (17 linear meters) per hour of 24-inch DTF film and achieve this on a standard USA home 110 volt 15-amp circuit.
Total curing coverage area reaches 110 square feet /10.2 square meters per hour
This DTF powder shaker is well matched with the output speeds of most single and dual head 24-inch DTF printers. The small footprint and minimal power consumption at 110v makes the EP24 ideal for mid and large-size shops that need a powder shaker that can keep up with their workflow.
Other 24-inch powder machines may advertise 110v operation at a slower rate, but even then, they will require a 20-amp circuit, which means an expensive electrician needs to be called in. Also, higher power consumption means more costly energy bills.
To achieve maximum energy efficiency, the 24-inch EP24 DTF Powder Shaker Oven 110v has an advanced motherboard with next gen firmware that goes far beyond simply turning the heating elements on/off based on a trip sensor watching film movement. The intelligent controller monitors temperature and multiple sensors and turns on only the required elements needed to achieve and maintain optimum powder curing. A built-in safety mechanism is a watchdog that disables the heating elements to protect the film from burning if the printer stops for any reason.
As you might expect from state-of-the-art technology, there is a touch screen with an intuitive and simple to understand user interface that allows full control of all important system elements.
Users will appreciate the auto powder recycling system that replenishes powder back into the top hopper, as well as the auto-advance-film link feature that can be engaged to continue to cure the last part of the film when cut away from the printer at the end of a job session. No need to waste extra film or attach weights and hand-hold the last stretch of film that needs to be cured.
Unlike less sophisticated systems that pull film from the take up reel, the EP24 utilizes a vacuum to carry the film through the shaker, thus providing two advantages over other systems:
The EP24 24-inch DTF Powder Shaker Oven 110v with Auto Powder Recirculation (white) ships fully assembled, but can easily be taken apart into 2 pieces to fit through a standard door. In most cases, simply removing the bottom wheels is enough to get the fully assembled EP24 through a standard door.
Best energy efficiency compared to any other 24-inch powder machine, intelligent controller, touch screen, auto powder recirculation, end-of-roll auto-advance, effective air filter with no need for external fume extractor and so much more - for those looking for the most cost effective shaker and lowest total cost of ownership, there is no better choice than the EP24 24-inch DTF Powder Shaker Oven 110v with Auto Powder Recirculation (white)
Want to save even more money on energy efficiency? Consider using Gallery DTF Extra Fine Powder. The lower melting point of Gallery DTF powder allows you to turn down the curing temperature of the shaker oven and also allows you to heat press prints at a lower temperature, minimizing heat press marks on performance garments.