Graphtec CE6000-60 PLUS Vinyl Cutter Plotter with Software and Stand

Graphtec CE-6000 PLUS Vinyl Cutter Plotter

USCutter has been a preferred authorized reseller and service center with Graphtec for over ten years.

The Graphtec CE-6000 PLUS has 450 gf of downforce pressure for cutting very thin films such as window tint* all the way up to the toughest sand-blast mask and reflective materials. It has a max cutting speed of 39 in/sec (in all directions) for quick output of intricate cut jobs. It also includes Graphic Studio 2, a complete design and cutting software solution similar to Illustrator or CorelDRAW.

*Tint cutting is available in the CE6000–120 AKZ configuration, and comes installed with Anti–Static Cords for front and rear which reduces the static electricity that is so common with tint films that can restrict media movement.

Reliable long length tracking up to 196.85 inchs long

The built-in front control panel provides complete parameter control including eight preset cutting conditions, as well as advanced features like tangential control mode, down force offset, pen up speed, blade wear monitoring and more. With a 25 pin RS-232C or the High Speed USB 2.0 control interface, the CE6000 Plus Series is compatible with legacy computer systems as well as the latest PCs available now and for several years to come.

Dual tool configuration and easy switching between cutting and plotting

The pen carriage holds both a plotting pen and a blade at the same time — to enable easy switching between plotting and cutting operations. Four sets of user-specified setup parameters are retained in memory for instantaneous recall. The pen is for plotting and detailing graded patterns with seams, text, notches, Grain direction, etc.

Enhanced speed when cutting

Innovative features include maximum cutting speeds of 39 ips and with a maximum cutting force of 450g. It also features an easy to use menu navigation system with eight groups of preset conditions which facilitates instantaneous recall of pre-programmed job-specific plotter setups.

Each CE6000 comes standard with: floor stands (except for the 15" CE-6000-40), Rear media roll rack with new media brake (60" and 120"), Graphtec Studio Software, Cutting Master Plug-In, plus Graphtec's ARMS (Automatic Registration Mark Sensor) system.

ARMS 5.0 for high precision cutting in the print and cut application

ARMS is an abbreviation for Advanced Registration Mark Sensing system, which uses sensors to detect registration marks and performs the AXIS ALIGNMENT. It is able to adjust received contour cutting data in the cutting plotter to align with the printed image. It enables to significantly improve productivity in the Print & Cut applications that makes stickers or decals.

The new CE-6000 PLUS model includes:

• Graphic Studio 2 Software
• Software can drive multiple cutters simultaneously
• Software automatically auto-detects any cutter once plugged into USB port
• Stand Included with 24" and 48" models (Not available with 15" model)
• Not included but compatible:
  • Adobe Illustrator (PC and Mac)
  • CorelDraw (PC)

Please Note: 48" Graphtec CE6000-120 models ship via freight.
Please call 1-425-481-3555 M-F 6:15am - 4:45pm PST for a quote.