Forever Hot Stamping / Screenprint Foil for Finishing 11.8" x 39'

Forever Hot Stamping / Screenprint Foil for Finishing 11.8" x 39'

Add the sheen and texture of sheer foil (even crumple for a distressed look) to Siser EasyWeed Adhesive cut decals for shirts and apparel, as well as printed Laser-Dark designs. Also apply to the adhesive formula used with screenprint stencils!

Until now, the finishing of textiles with Metallic Foils could only be achieved with a standard Flex or Flock material and had limited options. Only large logos and lettering could be plotted and transferred.

With a choice of 16 different Hot Stamping Foils, detailed or even rasterized designs (see TransferRIP) can be easily decorated. The typical limitations of the heat transfer process with Flex and Flock are now a thing of the past!

Finishing with Hot Stamping Foils (for all methods including Siser EasyWeed Adhesive, Screenprint, and Laser Dark):

1. Preparation of the Transfer (for use with Laser-Dark black-color prints):

• Print your design using only BLACK TONER (4-color-black*).
• Press with B-Paper
• Separate the A-Foil from the B-Paper while HOT, in a Slow, Low & Fluid Motion.
• Cut around your transfer to remove the coating frame.

2. Application: Transfer to Textile

• Place the transfer on your textile.
• Press together.
• Wait until the textile has completely cooled down, BEFORE removing the A-Foil FINISHING!

3. Application: Applying the Hot Stamping Foil (for all methods including Siser EasyWeed Adhesive, Screenprint, and Laser Dark)

• Place the desired sheet of Hot Stamping Foil on your design, cover it with a sheet of Matte Finish Economy.
• Press together.
• Wait until the Hot Stamping Foil has completely cooled down, BEFORE removing.
• Wash resistant up to 40°C (Cold Wash Cycle).
• TIP: Use a textile to rub over the finished design to remove leftover particles of the Hot Stamping Foil!

*4-Color-Black consists of 100% Cyan, 100% Magenta, 100% Yellow and 100% White and it‘s the perfect base for Hot Stamping Foils!