Chemica Sports 3D Fashion Heat Transfer Vinyl

Chemica Sports Flex Fashion brings out a textured look of leather or carbon fiber to garments with their special patterns. These patterns will add more dimension to simple sports jerseys, t-shirts and more. Perfect for replicating basketballs, footballs, gloves and carbon fiber on to fabrics. These 3D prints would not only add an eye-catching touch to just about any garment but also texture! The polyurethane material is easy to use and is very durable.

Adheres to:

• Cotton
• Polyester
• Acrylic
• Similar Fibers

Application Instructions:

Cut the film in reverse with a sharp, 45° blade. Perform a test cut before proceeding, adjust as needed. Weed excess material. Heat press the transfer on the garment with its polyester carrier protected by a silicone paper or Non-Stick sheet. Press with medium pressure at 300-320° F (150-160°C) for 15 - 20 seconds. Peel cool.

Note: 3D textures appears more pronounced after backing is removed following heat press.

Washing Instructions:

• Always respect the instructions mentioned on the garments.
• After heat pressing, wait 24 hours before first wash.
• Turn garment inside out.
• Machine wash 140F maximum.
• NO bleach or other aggressive washing products.
• Dry at a normal dryer setting on household machines.
• Do not dry clean.
• Ironing ok on backside only.
• Storage of the roll: Vertically, one year in a dry room, protected from sunlight.

Testing: Always test on a fabric swatch prior to production, especially on heavily treated fabrics.

Please Note: Cut orders, once placed, cannot be canceled or returned.